Tractor Mounted Drill

Easy & economical alternative to Crawler Drills for blast hole drilling

Technical Features

Kala KTM-130: Tractor mounted Rigs are specially designed for fast & cost effective drilling, economical alternative to crawler mounted drill. The drill is capable of drilling 102-115 mm dia holes up to a depth of 130 feet using Down the hole Hammer and bits.

MAST: Heavy duty drilling mast fabricated out of robust welded sections & designed for vibration free and continuous duty conditions.

Rotary Head: Piston type air motor with spur type heavy duty gear box

Feed Unit: Piston type air motor with spur-cum-worm type gear box

STABILISER: During drilling, entire load of the unit is shifted on to three hydraulic jacks provided. Desired set up of the unit is achieved by individual/separate levelling control through hydraulic directional control valves guided by a spirit level indicator to obtain desired setup in rough terrain. Additional Double check valve is incorporated in the hydraulic system as extra safety measures.

HYDRAULIC SYSTEM: The source of power is drawn from Tractor prime mover to operate hydraulic pump of adequate capacity for actuating hydraulic stabilisers, raising/lowering of mast.

OPTIONAL SPECIAL TROLLEY: If desired, a double axled special trolley (with articualte front axle) can be manufactured & supplied by us at extra cost to conveniently house compressor, diesel tank for entire unit, drill tubes and other accessories and allied items, which can be towed by the KTM-130 Tractor Mounted Drill

HIGH PRESSURE D.T.H DRILLING: The unit is designed for high pressure drilling for higher penetration rate and quality valve/valveless D.T.H. Hammers with bits can be supplied by us to maintain economical running cost with out compromising with the performance

Specifications

Description	RPM	B.H.P	Gear Ratio	Max. Torque	Pull Down Force	Pull up Force	Speed	Air Pressure
Rotation Unit	1250	4.5	1:30	10,000 lbs			0-50	7 kg/cm2
Feed Unit	1250	4.5	1:36.9		0-2200 kgf	0-2000 kgf.	15m/min	7 kg/cm2